Safety Data Sheet Product Data Sheet " />
WetX_Finish-20kg_997_1199x1199

WetX Finish 20 Lt

DryX Licker 5 Lt

In stock
SKU
US_10322

DryX Licker

https://market.seitz24.com/pub/media/wysiwyg/seitzshop/seitz/homepage/Image_DE/Bilder_Beschreibung/logo_new.jpg
Water mixable greasing agent for leather cleaning and regreasing
STORAGE CONDITIONS:
To be stored in a cool and dry place, protected from frost.
Protect from direct heat and sunshine.

MAXIMUM STORAGE TIME:
18 Months

APPLICATION in pre-spotting:
DryX Licker
can be used concentrated, diluted with Hydrocarbon solvents or emulsified
with water for prespotting strongly soiled goods. Apply by means of a brush or a
sponge.
CHARACTARISTICS:
DryX Licker contains natural and mineral oils which deeply penetrate into the leather
and do not glue the surface. DryX Licker intensifies leather dyes and the product has
an excellent leveling capacity. The treated leather articles receive a soft, voluminous
handle. DryX Licker has been developed for universal use in Perchloroethylene,
Hydrocarbon solvents and water. DryX Licker is easily emulsifying in water and can
also be used as emulsion in prespotting and regreasing by spraying.

CHEMICAL-PHYSICAL DATA:
Consistency:    
pH-value:    
Bulk weight :    

APPLICATION in dry-cleaning:
In multi-bath procedure, DryX Licker can be added to the cleaning baths in order to
prevent excessive degreasing caused by the solvent and the dry-cleaning additives. At
the same time, DryX Licker consolidates the dry-cleaning effect. DryX Licker can also
be used in the finishing bath. Due to the color-intensifying effect, it is important to adjust
the dosage to the color tone. In the case of fresh solvent, it is recommendable to start
with light-colored articles. This will then serve as basic concentration for the greasing
agent. All following concentrations will be regarded as addition and the specified
dosage thus be reduced up to 50 %.

APPLICATION in regreasing by Spraying:
For regreasing by spraying prepare an emulsion with part 1 of DryX Licker and 5 - 10
parts of water. Apply this emulsion to the leather surface by means of spray pistol. Then
dry in the drying cabinet or in the tumbler at low temperature.
The information provided herein is given on an advisory basis which does not imply any liability on our part. For further details see our
relevant safety data sheet prior to use !






More Information
manufacturer Unbekannter Hersteller
Write Your Own Review
You're reviewing:DryX Licker 5 Lt